ReJuviClean is a unique formulation that both cleans and renews protection against oil, water and stains on concrete and stone surfaces. This product is designed for high-performance building restoration and preservation applications. This product is a specially formulated, proprietary blend of fluoropolymer chemistry and cleaning agents designed to clean stone surfaces while rejuvenating oil, water and stain repellency applications. This product is designed to be used on surfaces previously treated with Presto’s ReJuviSeal®, Protect-A-Stone® or Stone Guardian® products. If desired, ReJuviClean may be used on unprotected surfaces. Applying ReJuviClean five times is equivalent to applying one full-strength coat of ReJuviSeal. This product contains ingredients that react with the silica within the stone to form a protective barrier against water, oil and stains. PRODUCT DETAILSAdvantages
Intended UseCan be used on concrete, masonry and stone surfaces.Horizontal or VerticalCan be used on either horizontal or vertical surfaces.DilutionDilute for use in concrete scrubbing machines or use full strength.Coverage Rates
Surface PreparationComplete all caulking and surrounding construction substrate applications prior to using this product. Newly installed stone or grout must be allowed to cure before application. Protect against personal contact with this and all chemical products. Protect any unintended surfaces. Always test in a small, inconspicuous area prior to use. For heavily soiled surfaces, some pre-cleaning may be required. The use of deionized water is required to achieve full product performance. Do not apply in below-freezing temperatures.ApplicationUse a low pressure sprayer, roller, brush, sponge or lambs wool applicator. This product can also be used in a pressure washing chemical injector or closed loop system. Allow product to saturate surface, but do not allow product to dry on the surface. Once soil is loosened, lightly rinse the surface with a pressure washer or garden hose. Do not apply direct water pressure to the stone while rinsing.Protection will begin immediately after sealant dries on the surface. Cure time for maximum water and stain protection is 24-72 hours. Application rates, concentration, temperature and humidity can impact dry and cure time. For buildings: This product is designed to seal precast while it cleans. It is suitable for a variety of stone surfaces, and functions to create an oil-, water- and stain-repellent finish. It protects against stains and is safe on glass and metal surfaces. For driveways: Driveways previously sealed with ReJuviSeal or Protect-A-Stone can be easily maintained using this product. Simply rinse down the driveway using ReJuviClean to clean any soils that may have accumulated and renew the water, oil and stain repellency. For Polished Stone: This product can also be used with a spray bottle and a rag to clean and install protection simultaneously on polished stone surfaces. In many instances, a combination of different stone cleaning products is necessary for various stone surfaces depending on their level and type of staining. Presto offers a complete line of stone cleaning products for all situations, including:
CleanupClean tools and equipment with mineral spirits. In the event protective products are allowed to come in contact with adjacent surfaces, dries and is difficult to remove, use one of the following surface restoration products:
Protected Surface Maintenance InstructionsFor ongoing maintenance of the protected surface, simply wash or wipe the surface again with ReJuviClean. It will clean and protect the surface simultaneously. The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface. The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written. Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product. VIEW STONE RESTORATION & PROTECTION PICTURESView our Stone Restoration Pictures Featuring projects that utilized our many products for their buildings restoration, maintenance or cleaning project.After cleaning or sealing stone surfaces the glass windows and metal frames almost always need to be cleaned, and many time window spots and stains removed as well. View our glass and metal products that compliment our stone restoration and protection arsenal. DON'T FORGET THE GLASS & METAL
| ReJuviClean is special order only. Call for pricing. |
View All Products > Architectural Precast, Concrete, Brick & Block Restoration Products > Stone Maintenance Products >